BALTHOR's Blog

A memory chip is magnetic recording.There has to be an engineered system for it to work.The pre BIOS sets up the area for a recording environment.Two rails of pulsed DC,one plus the other minus,and a recording head like scroll through the bits of time.The BIOS itself will detect the various devices in a computer.The frequencies,voltages and so on can be controlled there.Firmware from these devices should also be present in the BIOS as pages.

Every trillionth of a second each trillion parts of a second divide into a trillion parts again.Infinite frequency was attained by stacking these modules until the scope wave decreased and broadened out to become a line or dash.There might even be two dashes one plus and the other minus.On the scope was seen the DC dash of a dimensional particle of time.The infinite number was staggering in size and related to the atom.The frequency of the pulses of DC that DC power the memory chip in all DC digital devices had to be set to this infinite for digital itself to work.The DC had to be synced.The rest was magic.On the left side of the chip is DC minus on the right DC plus and in between is the magnetic recording substrate.The pulse of plus had to exactly match the location of the minus pulse.Like the track of a train the ties connect the rails.From there on it was like analog recording.On the scope after the dash was seen and the frequency was increased the dash would divide into smaller dashes.